1750 DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible! Recommended for novice riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil. Recommended for novice heavy weight riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET   UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET

INDIANA Y STRAP INCL. 3 SCREWS & 3 PLATES- Schrauben: metrisch

Flat, loose and even faster, the new S178 Stabilizer is a high-speed upgrade to the Sonar Foil System for experienced riders. We recommend pairing the S178 with Front Wing size HA950, or smaller. The S178 has a higher aspect ratio than the S208. Features Top mounted for early breach recovery​ Carbon pre-preg construction​ Thin profile section for reduced drag​ Materials Pre-Preg Carbon

FUSION ALLOY TOP PLATE MKII HIGH PERFORMANCE - DURABILITY SIZES: ONE SIZE The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast. Features: Precision CNC machined aircraft grade, anodized 6061-T6 aluminium Incredible torsional stiffness  

JET 1250 COMPLETE Foil Surfing/Wake Foiling/Wing-Surfing PRODUCT DESCRIPTION Naish Jet foils feature a medium aspect ratio delta wing planform with moderate anhedral to deliver the optimum combination of early lift, speed and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from wind surfing and wing-surfing to downwind kite foiling. The 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for lightwind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 backwing, which gives the complete setup more intuitive turning and response for pumping. To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system. Jet 1250 is ideal for riders 160-210 lbs PERFORMANCE FEATURES Jet 1250 Front Wing = Optimized lift, speed & turning Stabilizer 320 Back Wing = Intuitive turning & stability 75 cm Mast = Improved turning & pumping performance Lighter Design = Better control & response   CONSTRUCTION FEATURES Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts 5 x 20 mm Torx Head Stainless Steel Screws (Connect Wings to Fuselage) = Superior torque + corrosion resistant 3 x 25 mm Torx Head Stainless Steel Screws (Connect Mast to Fuselage) = Superior torque + corrosion resistant 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Direct Connect Plate to Board) = Superior torque + corrosion resistant

The F-ONE aluminum mast can be connected to the board with several options. Choose from a 4-bolt top plate, a standard Tuttle head, a KF or a DKF head. All versions are fastened to the mast through a sleeve and a two-bolt system. The Mast Top parts are machined out of solid blocks of 6061 aluminum. The accuracy of the CNC makes sure the geometry of the connection is perfect. Stainless steel inserts are used systematically to preserve the durability of the fastening connections. The Top Plate has become standard on the market and is compatible with any board featuring a Twin-Tracks system. The spacing we use for the four screws is 160×90 mm, but our latest version also features an option for 165×90 mm. The Top Tuttle makes F-ONE foils compatible with all Tuttle boards. The Tuttle format is the original and standard one. A flange has been added around the base of the head to better spread the load through the structure of the board. The KF and DKF heads make current F-ONE foils compatible with kite or SUP foil boards produced previously with these boxes. Refs: 77207-0401 (mast top plate) / 77207-0404 (mast top tuttle) / 77207-0403 (mast top deep kf) / 77207-0402 (mast top kf)

Our new V-STRAPS have been specifically designed for foilboards. The shape and material have been selected to bring maximum comfort and support while riding. Both straps have a thin layer of neo-fleece material on the inside that will bring extra comfort and softness. The main V-shaped piece for your front foot is compatible with boards that have one or two rows of inserts. Two options are available depending on the type of inserts (metal or plastic) on your board: M6 Screw Set (Ref. 77228-8001) 1x Front V-Strap 1x Back strap 1x V-Block, to place at the center of the V-strap for the screws 4x Plastic shims 6x M6 22mm screws (SST 316) 6x Metal washers (SST 316), 12mm external diameter Recommended for : POCKET, POCKET CARBON, ROCKET ASC   Self-tapping Screw Set (Ref. 77228-8002) 1x Front V-Strap 1x Back strap 1x V-Block, to place at the center of the V-strap for the screws 6x Self-tapping screws 5x25mm (SUS 316) 6x Metal washers (SST 316), 14mm external diameter 4x Plastic washers (thickness = 2mm), 17mm external diameter Recommended for : ROCKET WING, ROCKET WING CARBON, ROCKET WING – S, ROCKET WING -S CARBON, POCKET CARBON CUSTOM  

SIZE CHART SIZE 6'4" 6'10" 7'2" 7'8" VOLUME 85 L 95 L 115 L 135 L WIDTH 19" / 48 CM 20" / 50.8 CM 21" / 53 CM 22.5" / 57 CM LENGTH 6'4" / 193 CM 6'10" / 208 CM 7'2" / 218 CM 7'8" / 233 CM WEIGHT (+/- 6%) 5,06 KG 5,39 KG 6,08 KG 6,74 KG FITTINGS 2X US FOIL TRACKS 2X US FOIL TRACKS 2X US FOIL TRACKS 2X US FOIL TRACKS REC. USER WEIGHT < 85 KG < 95 KG < 100 KG < 110 KG FOOTSTRAPS NO NO NO NO COLOR 266C 266C 266C 266C

JET HA 1800 COMPLETE Expert Performance Foil Surfing/Downwind Foiling/Wing-Surfing PRODUCT DESCRIPTION Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, Wing-surfer and downwind foiling. These wings feature high aspect ratio planforms and proprietary thin section profiles – the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To compliment the high-end performance of these new wings, the complete foils feature a new high aspect stabilizer as well that emphasize pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input. To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra-lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.  Jet 1800 is ideal for riders up to 240 lbs PERFORMANCE FEATURES Jet HA 1800 Front Wing = Optimized glide & improved top speed Stabilizer HA  310 Back Wing = High-speed stability & responsive pumping 75 cm Mast = Improved turning & pumping performance Lighter Design = Better control & response CONSTRUCTION FEATURES Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast Updated Aircraft Grade Aluminum Jet/ Kite 64 cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts 5 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant 3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant

Rise up Let the Seek wing-foil board take you places you’ve never been. Upwind, downwind, ocean roller or lake. Wherever you fly, whatever adventure you take. Engineered for performance. Early take-offs. Effortless touchdown recovery. The Seek provides you with an intuitive and direct connection to your hydrofoil, becoming an extension of you – the rider. It has an ultra-lightweight yet durable hybrid carbon construction that is stiff, responsive and maneuverable and it’s precisely-balanced distribution of volume means that no matter whether you’re in displacement mode, skimming or foiling, your stance remains in the same position - no shuffling required. Because every movement counts. Try it. Land it. Or pump it. Floater, sinker or somewhere in between – there’s a board size and volume for every start need. And no matter what, you won’t look like a kook carrying your setup to the water. The recessed carry handle will keep your Seek, Sonar and dignity safe. Cutaways and tapered tail The sharp release edge on the tail allows for an earlier take-off, while the cutaways and the way the tail tapers reduces the volume in the tail, helping to bring the board’s centre of buoyancy forward, right underneath your stance.  Touchdown Recovery The nose spine and double-concave in the underside of the nose, combined with the steep bevelled rails, helps with touchdown recovery. The V-shape in the bottom contour of the board breaks the water surface on touch down, so the board dives in gently and releases quickly, without sticking. The V also helps to funnel air under the board, which helps it to release faster. Hybrid Carbon Technology Lighter weight construction for stiffness, manoeuvrability and glide. The stiffer the board, the better it will pump and the more responsive it feels. A light yet durable board with greater impact resistance and rigidity. DETAILS NEW FREE-V AND FREE FOIL STRAP INSERTS Additional off-centre strap inserts allow you to customise your stance with 5 different positioning options for each strap - or go strapless. (Straps sold separately) GORE™ WATERPROOF 2-WAY VENT The EPS core of a high volume board is affected by extreme temperature changes. To prevent air pressure build-up we’ve installed a two-way GORE™ Protective Vent on the top deck. This allows air to pass in and out of the board, while preventing water from entering. The vent is factory-fitted and does not require any adjustment. DOUBLE CONCAVE DECK There is a significant amount of concave in the deck that works to position the rider lower and makes the board more stable to ride. The concave puts all the volume outside on the rails, so the centre of the board is the low point. It creates the best potential for balancing and is the most comfortable and responsive shape to stand on.   HYBRID CARBON TECHNOLOGY Lighter weight construction for stiffness, manoeuvrability and glide. The stiffer the board, the better it will pump and the more responsive it feels. A light yet durable epoxy composite laminate, with a balanced carbon and e-glass fibre layup is wrapped around an EPS core. High-density closed cell PVC reinforcement around the foil track mount, leash plug and foot strap inserts spreads the load. An ultra-lightweight double bamboo reinforcement layer under the standing area adds greater impact resistance and rigidity. INTEGRATED PVC STRUCTURAL STRINGER SYSTEM The DropBox foil mounting tracks are embedded into a high-density closed-cell PVC block. Two high-density PVC stringers are glued to each side of this block, distributing the load lengthwise, and the full system connects the top and bottom laminate skins for maximum support. DROPBOX ADJUSTABLE FOIL MOUNTING TRACK Speed-dial your foil setup. Simply drop your foil pre-assembled with screws and t-nuts into the track, slide it backwards, then tighten the screws to fasten. Our unique structurally-integrated DropBox has a longer track for a wider adjustment range, allowing you to precision-tune the foil set up for your rider weight. A measurement guide next to the track aids correct positioning. Industry-standard 90mm track spacing means the DropBox is compatible with most foil systems. DEEP-V DOUBLE NOSE CONCAVE The nose spine and double-concave in the underside of the nose, combined with the steep bevelled rails, helps with touchdown recovery. The V-shape in the bottom contour of the board breaks the water surface on touch down, so the board dives in gently and releases quickly, without sticking. The V also helps to funnel air under the board, which helps it to release faster. STEEP BEVELLED RAILS Help with touchdown recovery and water release. CORDUROY DECK GRIP WITH TACTILE & VISUAL STANCE REFERENCE For a more intuitive and direct connection to your foil, grippy longitudinal corduroy with centre-line ridge allows fast, easy tactile foot placement. Tail kickpad with cutouts on the Swell for your feet while prone paddling. Transverse markers on the deckpad provide a visual reference, giving you confidence to adjust. INTEGRATED UNDERSIDE CARRY HANDLE Recessed carry handle on the underside of the foil board allows balanced load handling with or without the foil attached and leaves your other hand free to carry your wing or paddle down to the water.  COMPACT OUTLINE WITH GENEROUS NOSE VOLUME The shorter the board, the more effective it is for pumping, the less swing weight, and the more aerodynamic and manoeuvrable it is when riding up on the foil. The reverse shear of the deck and downward curve in the nose allows for greater control over the board, even when fully submerged on water starts. The extra nose volume was added on top so the boards could be cut short without losing stability and allows you to ride a board 6” shorter. The volume in the nose also stops you nose-diving when you’re paddling into a wave and helps keep the water off the concave deck. CUTAWAYS AND TAPERED TAIL The sharp release edge on the tail allows for an earlier take-off, while the cutaways and the way the tail tapers reduces the volume in the tail, helping to bring the board’s centre of buoyancy forward, right underneath your stance. Having the centre of buoyancy directly underneath your stance is essential for finding that sweet spot on the board where you can remain without shifting your weight back and forward. The wedged tail shape reduces the overall length and improves the pumpability of the foil. Every movement counts to staying up on the foil. 

We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all.  Features Recommended with S215 Stabilizer Super low stall speed Effortless pumping Surf-style turning (smooth rail to rail and surf yaw snap) Forgiving and accessible for faster progression Materials Pre-Preg Carbon Titanium Screws

The FUSELAGE CARBON is an essential complement to the F-ONE Monobloc carbon wings. It connects with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired from the TITAN design and offers a very robust and stiff assembly. At the back, the cradle for the stabilizer is designed with the right angle to make the front wing fly with ease and efficiency. The FUSELAGE CARBON is built in pre-preg carbon with a foam core to keep the weight extremely light. Some solidly anchored brass inserts are used for all fastenings. Best maneuverability Better responsiveness Ultra-light carbon construction Weight: 0.20 kgLength: 37 cm

JET FOIL RANGE:   Jet 1050 + 1250 Naish Jet foils feature a medium aspect ratio delta-wing planform with moderate anhedral to deliver the optimum combination of early lift, speed, and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for light wind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 back wing, which gives the complete setup more intuitive turning and response for pumping. To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra-lightweight and strong.   Jet 1650, 2000, 2450 The Jet 1650, 2000, and 2450 share many similar features to their smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind, and Wing-Surf foiling. These wings are paired with the Stabilizer 450 back wing, which gives the complete setup more lift at lower speeds and is optimized for improved turning and pumping performance.

Sabfoil Gullwing 380 Pro Finish | Hydrofoil Stabilizer MAIN SPECS Surface: 180 cm2 AR: 8,10 Wingspan: 380 mm Chord: 60 mm Range Gullwing Stabilizer-Fuselage Connection Standard This fast and versatile stabilizer is ideal for all those who want to increase the control and stability of their hydrofoil. The gullwing shape guarantees good directionality while riding without sacrificing maneuverability when needed.   The S380/PF is delivered with SAB Pro Finish, and thus hand sanded to achieve a matte surface with 0-thickness graphics, for an elegant Made in Italy product with maximum performance.

We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all. Features Recommended with S215 Stabilizer Super low stall speed Effortless pumping Surf-style turning (smooth rail to rail and surf yaw snap Forgiving and accessible for faster progression Materials Pre-Preg Carbon Titanium Screws

WingAir SE PURE WING FOILING Our pure wing foil inflatable. The compact hull and JP’s superior construction provide a stiff feel when flying on the foil. It is super user friendly because it provides all advantages of inflatables: comfortable and smooth on your skin and knees, light and small for easy transport and storage. More on inflatables? See below...There is no better JP board when it comes to pleasurable, enjoyable and hassle-free winging in light winds. Pure wing foiling fun!Top recommendation: The NeilPryde Glide foil fits perfectly and is our first choice – the Glide Wind for beginners and/or heavy weights (for its ease, control and steady lift), the Glide Surf for light and/or advanced riders (for its agility and life).The two sizes from last year (5’4”x27.5” and 6’0”x28.5”) are now partnered with a smaller 5’0”x27.5”. All boards feature footstrap positions for wing-foiling and foiling.   Inflatables have clear advantages over hardboards: They are super comfortable and user friendly as they are easy to transport and store. These JP inflatable wing foil boards are specially developed and equipped for early take-off, featuring hard rails, Triple Layer Composite Drop Stitch and more. Additionally, they come in JP’s superior welded technology. Welded Technology: This heat-welded connection was introduced last year and proved to be successful. It creates a very strong mechanical joint that literally fuses two parts into one and thus is superior to the standard gluing. This welding process of amalgamating two different layers into one makes the board safer, lighter and stiffer. Hard Rails: In the tail, the specially developed, super clean hard rails are covered by a fibre reinforced layer of PVC cloth and create a smooth and efficient water release. Thus, the board picks up speed to take-off easily. Touchdowns are smooth and comfortable. Triple Layer: They come with Pre-Laminated Triple Layer Composite Drop Stitch, Fibre Reinforced Stringers in deck and bottom and Welded Rails and will surprise you with their stiffness. Track Foil Plate: The board features a Track Foil Plate of the same size as on our hard boards providing a big range of foil placement. The G10 material adds additional longitudinal stiffness to the hull. On the other hand, this plate is not too long – thus you don’t need an oversized bag but it can still be folded easily into a normal size SUP backpack. Footstraps: The boards come with three easy-to-mount footstraps for wing foiling. Comfort: The hull’s soft skin is covered with a large, slip-proof EVA sheet for unmatched comfort and a safe stance. You also don’t have to worry about mistakes anymore because you won’t get hurt when falling on it. Transport and Storage: Rolled up, the boards fit into a backpack – no more need for a car with roof rack for transport or a big garage for storage. In times when airlines are hesitant to accept windsurf equipment, the boards’ backpack dimensions are a major advantage!  ADDITIONALLY INCLUDED ACCESSORIES * 3 straps* Pump* Repair set* User manual* Backpack PLEASE NOTE: Reduced foil track depth [13mm]. Make sure to use the right screw length for your plate mount system!MAX screw length = 13mm + Plate Thickness All JP foil boards come without screws to attach the foil. Reason: The screw length has to match the plate thickness which varies from foil and brand, so, screws are provided by the foil brand. Note: This inflatable JP board features a special G10-track-plate requiring shorter screws, than all our JP composite boards.For example:The screws supplied with NP foils fit all JP composite boards. But these screws are too long for this inflatable!Therefore, NeilPryde now also offers a set of four M8x20 screws (titan, torx key head) in their spare parts range.

SPIRIT FREERIDE 700 / 90 Easy accessible allround foil and the ideal tool to quickly improve your hydro foiling skills. KEY FEATURES DUOTONE SPIRIT FREERIDE EASY ACCESSIBLE ALLROUND FOIL THE SPIRIT FREERIDE IS AN EASY ACCESSIBLE ALL-AROUND FOIL AND THE IDEAL TOOL TO QUICKLY IMPROVE YOUR HYDRO FOILING SKILLS. TRACKING AND DIRECTIONAL CONTROL GOOD PREDICTABLE TRACKING AND DIRECTIONAL CONTROL IN ANY SITUATION. NEW ALUMINIUM FUSELAGE WITH POCKET FOR MAST CONNECTION A UNIQUE NEW ALUMINIUM FUSELAGE WITH POCKET FOR THE MAST CONNECTION GUARANTEES MAXIMUM STIFFNESS AND THE BEST AND MOST DIRECT TRANSMISSION OF STEERING IMPULSES. NEW MAST PROFILE WITH LONGER CHORD THE NEW MAST PROFILE WITH A LONGER CHORD LENGTH ELIMINATES VENTILATION AT HIGH SPEED. CARBON COMPOUND FRONT AND BACK WING UNIQUE AND INCREDIBLY DURABLE CARBON COMPOUND FRONT AND BACK WING. FORMULA 1 FUSION TECHNOLOGY FORMULA 1 FUSION TECHNOLOGY IS USED FOR THE CONNECTION OF THE MAST TO THE PLATE - MADE IN GERMANY! DETAILS DUOTONE SPIRIT FREERIDE The goal with the Spirit Freeride foil is to find the perfect allround, multi-purpose hydrofoil setup. It’s a single-stroke wing in the sense that you will normally be flying after just a single power stroke from your kite and already maintains flight at lower speed. The Spirit back wing is big enough to give good pitch control at low speeds, but not too big to hold you back at the top end. Winglets offer good tracking and directional control. There ́s no better choice to start your foil freeride career than using the spirit freeride set up at an unbeatable price point.

FUSION FQR HIGH PERFORMANCE - DURABILITY SIZES: ONE SIZE The Patent pending Cabrinha Foil Quick Release is an innovative new tool-less mast plate that allows you to detach your foil mast from the board in seconds. The tapered engagement provides a press fit that will ensure a solid connection without any movement. Gone are the days of trying to tetris pack your foil boards to and from the beach, simply pull the release lever and the mast detaches. The FQR release attaches to all industry standard 9cm foil board track. Features: Cam lever - Tool less operation Aircraft grade extruded, anodized 6061-T6 aluminium components Lightning fast attachment Universal 9cm mounting Safety key engagement tapered engagement Anti-line snag geometry - increased safety when kiting Precision calibration design  

SPIRIT GT 565 / 90 HIGH PERFORMANCE / FREERIDE The need for speed with total control, continuously pushing the limit and still asking for more. KEY FEATURES DUOTONE SPIRIT GT EXCELLENT TOP END SPEED CONTROL EVEN AT TOP SPEEDS, THE SPIRIT GT OFFERS PLENTY OF CONTROL AND IS ASKING FOR MORE. HIGH ASPECT RATIO WING DESIGN A HIGH ASPECT RATIO WING DESIGN IS RESPONSIBLE FOR GREAT TOP END PERFORMANCE. NEW ALUMINIUM FUSELAGE WITH POCKET FOR MAST CONNECTION A UNIQUE NEW ALUMINIUM FUSELAGE WITH POCKET FOR THE MAST CONNECTION GUARANTEES MAXIMUM STIFFNESS AND THE BEST AND MOST DIRECT TRANSMISSION OF STEERING IMPULSES. NEW MAST PROFILE WITH LONGER CHORD THE NEW MAST PROFILE WITH A LONGER CHORD LENGTH ELIMINATES VENTILATION AT HIGH SPEED. FULL CARBON FRONT AND BACK WING FULL CARBON FRONT AND BACK WINGS FOR MAXIMUM PERFORMANCE AND OUTSTANDING LOOK. FORMULA 1 FUSION TECHNOLOGY FORMULA 1 FUSION TECHNOLOGY IS USED FOR THE CONNECTION OF THE MAST TO THE PLATE - MADE IN GERMANY! DETAILS DUOTONE SPIRIT GT If you have the need for speed, the GT is your speed demon! The most noticeable difference between the freeride wings and the GT is that the faster you go the more stable the GT becomes. This stability at speed allows the committed foiler to really push the limits. The carbon wings are shaped for a minimum of drag, are built to go fast and like to be pushed to the limit. The Spirit GT foil is exactly what speed freaks are searching for in a foil.

The Sky SUP is our 100% dedicated foil SUP designed to maximise your fun – even in tiny waves - and to give you the longest rides of your life! Everything about the compact Sky SUP has been optimised to make it as easy as possible to catch waves. The compact dimensions, thick bevelled rails and channel bottom give stability and allow it to paddle straight and free; while the recessed deck and stance give great leverage and control over the foil. This year we boosted the performance with higher rocker, refined outline with narrower nose, and added a step tail to reduce drag when riding steeper waves and increase efficiency when pumping onto the foil. The 6'3" Sky SUP LTD is the ideal Board to learn Wing Foiling for lighter and medium weight riders and take your skills straight up to advanced level.

Foil Slate IPR LIGHTNING FAST AND FLYING HIGH   2023 SUP & WING ALL-ROUND 7'8"  8'2"  8'10" The FOIL SLATE is a top choice of the riders and the most flexible board in the market at the same time! For this reason, our shape was awarded the “SUP Paddlesports of the Year 2020” at the PaddleExpo, the biggest trade fair of paddle sports in the world. Werner Gnigler created this great shape for those who wanted to have an all-in-one water sports board. Please note: SUP Foil, SUP Surf Foil, SUP Downwind Foil, Wing Foil, Windsurf Foil, SUP Surf, SUP, Wing Surf and who knows what else can be tried with the Foil Slate!Stable, fast and reactive are the main strengths of the Foil Slates. Use the extra speed to glide across flat sections of the wave or to hit the lip with full power. The bottom shape features a V entry that flows into a deep single concave ending with a subtle V right at the center fin position. This ensures a smooth lift and an easy rail-to-rail transfer.Two US long track boxes are available for foil sports, allowing different foil positions based on the rider skills, the size of the foil and the use. On the other hand, the boards are equipped with a set of thruster fins and three FCS boxes for Stand-Up Paddle use.The FOIL SLATEs also come with strap plugs positioned for windsurf-foiling.  

efficient pumping, direct control, light & solid Pump foiling is the exhilarating new way to glide and dance across the water, harnessing speed and lift through the power of your own body movements. Whether you’re an ambitious discoverer or a seasoned pro, the ENSIS HIP HOP PRO carbon board delivers unmatched performance that will leave you craving more. Its perfect grip, compact shape, and direct power transmission ensure optimal pumping efficiency. Say goodbye to wasted energy and hello to a seamless ride that will leave you grinning from ear to ear! The beveled rails provide a secure and comfortable grip, essential for smooth dock starts. Finding the right foot position on the board has never been easier, thanks to its ideal size. Once flying, you’ll feel an unparalleled connection to your every movement, enjoying complete control over your foiling experience. If carving is your goal, send it! Crafted with precision and excellence, our board boasts a prepreg carbon construction that sets the bar for superior quality. Offering minimum weight and unbeatable durability, you can trust that this board is built to last, season after season. HIP HOP PRO 98

easy take-offs, efficient pumping, ultimate gliding Looking for fun on the water on a windless day? Go pumping with the ENSIS STRIDE, a high performance dock start, pump and SUP foil for discoverers to the crazy carvers. The STRIDE is a high aspect ratio hydrofoil that offers exceptional lift and efficiency at low-end speed, designed for easy take-offs. The foil is perfectly balanced, supporting your take-off abilities to the max. The light and stiff mast provides optimal power transmission. The front wing and the gullwing shape stabilizer are designed to offer you exceptional pumping efficiency and control. After a few efficient pumps, the good high-end speed comes into play. The shape of the front wing reduces drag, saving you energy while pumping. You will feel like you are gliding forever. You want to get crazy with your carving moves? The rather flat front wing with thin sweeping edges allows you to slide without disturbing the water flow across the entire foil and stalling. It is time to dance and play on the water! STRIDE 1900 Set: The ENSIS STRIDE 1900 is delivered as a set (73 cm mast, 1900 cm2 front wing, 70 cm fuselage, 265 cm2 stabilizer), foil mount and foil assembly screw set, allen and torx key.

The F-ONE Alu Fuselage 70 provides an ultra-rigid wing connection. Built in aluminum, it is very strong and allows the suitable front wings and stabilizers to be connected effortlessly. • Super stiff wing connection• Solid aluminum construction• Slender and reinforced hydrodynamic section This fuselage connects directly to F-ONE aluminum masts. It is made of superior-grade aluminum 6061, CNC machined with high precision and fully anodized. The aluminum profiles make the most of this homogeneous material to offer perfect rigidity, both in torsion and in bending.This fuselage is recommended for the IC6 650 V3 front wing. It is supplied with the necessary screws to connect the front wing (2x M6-25mm and 2x M6-15mm), the mast (2x M6-25mm) and the stabilizer (2x M6-15mm).You cannot use a carbon mast on this fuselage.